This is a read-only mirror of pymolwiki.org

Stick radius

From PyMOL Wiki
Revision as of 04:11, 31 August 2009 by Ykalidas (talk | contribs) (→‎Syntax)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Overview

This setting affects the radius of sticks in the sticks representation. Default scale is set to 0.25.

In newer versions of PyMOL, one may set the Stick_radius on a per-bond basis. So, you can set for example, the radius of only selected bonds if you want. This is done through the Set_bond command.

Syntax

set_bond stick_radius, ''size'', selection

where,

  • size can be any float number. Using 0.25 (default value) is usually appropriate for most representations, although 0.15 migh be preferred for comparing closely related structures, e.g., conformers.

Note:

set_bond stick_radius

by itself will revert to 1.00.

If the above commands do not work

You can do something like below

set stick_radius=0.12

Related settings