This is a read-only mirror of pymolwiki.org

Linux Install

From PyMOL Wiki
Jump to navigation Jump to search

Installing PyMol is quite straightforward.

PyMol

Installing PyMol is very simple, even from source. On Linux, you need the following requirements:

  • Python (with distutils)
  • Pmw (Python Megawidgets)
  • OpenGL driver (I use NVidia)
  • libpng

Generic Linux

From Source

Many people want the latest versions of PyMOL as they usually have valuable features, but don't want to build PyMOL. Building PyMOL is generally very simple.

This quick install assumes you already have a Subversion client installed, have internet access, and all the dependencies are satisfied.

To obtain a copy of the current revision version issue the command:

svn co https://pymol.svn.sourceforge.net/svnroot/pymol/trunk/pymol pymol

Then go into the source directory:

cd pymol

If you have root or superuser privileges you can continue with the installation. If not follow this guide

Run the first stage of the installation:

python setup.py install

Run the second stage of the installation:

python setup2.py install

A launch script pymol will have been created. You can copy this script in the /usr/local/bin directory, so that any user of the system can use PyMOL:

cp ./pymol /usr/local/bin

Test your installation. If you get an error message "ImportError: No module named Pmw" and lack half of the user interface, then run the additional command:

python setup2.py install pmw

If you want to update the source code to the latest svn revision, go into the pymol directory and issue the command:

svn up

To uninstall the PyMOL:

python setup2.py uninstall

Installing without root Privileges

Use the prefix command to specify where to install PyMOL:

python setup.py install --prefix /dir_to/pymol/py_build

Then, you'll need to modify your PYTHONPATH variable:

export PYTHONPATH=$PYTHONPATH:/dir_to/pymol/py_build/lib/python{version}/site-packages

Install to prefix:

python setup2.py install --prefix /dir_to/pymol/py_build

Now you can run PyMOL:

./pymol

Compiling By Hand

Due to the large variance of Linux systems, some systems may work fine with PyMol, and some may have related install issues. To overcome this, you can download the ext package and the PyMol source and compile/install by hand. The ext package is available from the Source Forge download section and contains all the necessary software to make PyMol run. In the most recent available version (0.99rc1) this includes

  • tcl-8_4_11.tgz
  • tk-8_4_11.tgz
  • zlib-1_2_3.tgz
  • libpng-1_2_8.tgz
  • python-2_4_2.tgz
  • numeric-24_2.tgz
  • pmw-1_2.tgz
  • freetype-2_1_10.tgz

--and--

  • (freeglut-2_4_0.tgz

--or--

  • glut-3_7_6.tgz)

Supported Packages

The above packages don't need to be installed from their source-packages only. That is, you can use your system's installer (eg. yum, YaST, apt-get, rpm, etc.) to install the packages. Just be sure, if you install the above packages with your system's installer, that you also include the development packages. PyMOL needs the source/header files to compile against. For example, don't only install, freeglut-2.4.0 but also look for, and install, freeglut-2.4.-devel .

Once downloaded, see the file pymol/INSTALL and pymol/INSTALL.generic.

Here's the basic steps to install by source:

  1. get the source PyMol Source
  2. extract both packages, rename ext-VERSION.tgz to ext and move it into the pymol directory
  3. cd pymol
  4. cd ext
  5. vi build.com # edit the build file
  6. cd ..
  7. cp setup/Rules.make . # or correct Rules.make file for your machine
  8. vi Rules.make # make appropriate changes
  9. vi setup.py # make appropriate changes
  10. make

Warnings:

  • if you're using a 64-bit machine, lib becomes lib64 for almost everything
  • ensure you have the correct Python path and version (is it 2.3? 2.4?)
  • make sure you make the changes in Rules.make, setup.py, and Makefile, for your platform. For x86_64, besides above files, change following line in contrib/modules/Makefile.pre.in.src pointing to lib64 (leafyoung at yahoo dot com)
  LIBP = $(exec_installdir)/lib64/python$(VERSION)

Copy the appropriate setup/Rules.XXX file to the base PyMol dir. You'll have to edit the file for your system. Then run 'make'.

External Links to Distribution-specific Packages

Some of the detailed information in the subsequent sections may be obsolete, so here are links to package information pages:

  • Gentoo-portage: [6]

Fedora

Starting from Fedora 9, you can install PyMOL from yum repositories.

As root:

yum install pymol

This will install the latest precompiled version of PyMol. If you want the bleeding edge version or you have an older version of the operating system, follow the instructions for Generic Linux. In order to satisfy all dependencies necessary for compiling from source issue as root (or superuser) the following command:

yum install python-devel freeglut-devel freetype-devel tkinter python-pmw

Gentoo Linux

As root:

emerge pymol

be sure to have the proper OpenGL configuration. For example:

eselect opengl ati
eselect opengl nvidia

list of available versions in portage pymol for gentoo

All beta releases are maintained in the science overlay, which can be used with

layman -a sci

There is ongoing development in providing plugins via ebuilds with an thread in gentoo bugzilla. The ebuild can be checked out via svn

svn co http://svn.olausson.de/molmod/trunk

There is also svn ebuild of pymol, which contains all bugfixes which are request in the gentoo bugzilla.

All bugs and feature request should be either send to justin at j-schmitz dot net or spamsuxx at gmail dot com.

SuSe

32-bit (x86)

See #Generic Linux above.

64-bit (x86_64)

See #Generic Linux above. Some details for problem solving are here. 64-bit Python install is quite easy. Make sure your nvidia driver is installed (or ATI, but I have no experience there).

To install PyMol

  • Ensure your system has it's distutils in place and ready to use. Try the following check:
from distutils import *
  • Download the source
  • Download Pmw from SourceForge.
    • To install Pmw, just decompress it and then move the base director "Pwm" to /usr/lib64/python2.3/site-packages/. You can test that it's there by testing the import, see below:
import * from Pmw

If errors erupt, investigate.

  • decompress the source and cd into the PyMol directory that was just decompressed.
  • If upgrading see below.
  • Now enter the following...

python setup.py build
sudo python setup.py install
sudo python setup2.py

  • The sudo commands will need a root password or someone with sudo capabilities.

I also copy the 'pymol.com' file to /usr/local/bin or /usr/bin -- somewhere in my path:

sudo cp ./pymol.com /usr/local/bin

Please note that newer versions of PyMol create the pymol executable, not pymol.com. So, for later versions (~0.99+) use

sudo cp ./pymol /usr/local/bin


You should now have a working PyMol install.

pymol.com should now run your new PyMol install.

Mint11 Linux

From Source, one can build pymol

## Tested on a fresh VirtualBox Linux Mint 11, 32bit
sudo apt-get install subversion
svn co https://pymol.svn.sourceforge.net/svnroot/pymol/trunk ~/
cd ~/pymol
## gcc-4.5 is broken for pymol install. So we use gcc-4.4
sudo apt-get install build-essential gcc-4.4 g++-4.4
export CC=/usr/bin/gcc-4.4

## From INSTALL we read we need, OpenGL, glut, libpng, tcl/tk, python,
## freetype2, and Pmw and some of their -devel packages 
## I found these packages to be minimum
sudo apt-get install python-dev python-pmw libglew1.5-dev
sudo apt-get install freeglut3 freeglut3-dev
sudo apt-get install libpng12-dev
sudo apt-get install libfreetype6-dev

## Now we are ready to build
python setup.py build
sudo python setup.py install
sudo python setup2.py install

## Make a link, so we can call execute pymol
sudo ln -s ~/pymol/pymol /usr/bin/pymol

## To add a path/folder where you can put pymol scripts
echo 'import sys' >> ~/.pymolrc
echo 'sys.path.append("~/pymol/modules")' >> ~/.pymolrc

## Launch pymol
pymol

Preparing your System

See Linux_XFree86_Configuration.

Graphics

XFree86 Config

Check out Configuring XFree86 if you need information on editing the XFree86 configuration file.

Xorg

Adding a

Stereo 3

option in /etc/X11/xorg.conf suffices to run pymol in stereo mode on a 64bit system with the Nvidia Quadro FX1400 under Red Hat Enterprise 4 (RHEL4). Adding the following modeline (determined via /usr/bin/gtf):

ModeLine     "1280x1024_118.00" 229.7 1280 1384 1528 1776 1024 1025 1028 1096 -hsync +vsync

appears to slightly improve the stereo quality, in particular when one displays labels and/or dashes/dots.

For those having possible driver issues, this link might help NVNews

xorg.conf for stereo in Fedora Core 6

It is assumed that you have installed the proprietary Nvidia graphics drivers, and that the "Device" section of xorg.conf has the following line in it:

Driver "nvidia"

Add the following section to the end of xorg.conf to disable "Composite", which is incompatible with stereographics.

Section "Extensions"
     Option "Composite" "Disable"
EndSection

In Section "Screen" add the following line to enable quad-buffered stereo:

Option "Stereo" "3"

Problems

Input

If you notice that the keyboard input is ignored into the Pmw widgets, you may have an X-based input method editor installed and running. Such examples could be SCIM, KINPUT/2 or the like. Try turning off the IME and restarting PyMol to get the widgets to recognize your input.

libnvidia-tls.so.1: cannot handle TLS data

If you get an error, upon invoking pymol, of the form

Traceback (most recent call last):
  File "/usr/lib/python2.4/site-packages/pymol/__init__.py", line 109, in ?
    import pymol
  File "/usr/lib/python2.4/site-packages/pymol/__init__.py", line 353, in ?
    import _cmd
ImportError: libnvidia-tls.so.1: cannot handle TLS data

then try changing the permissons on libnvidia-tls.so.1. i.e,

 sudo chmod 777 /usr/lib/libnvidia-tls.so.1   

Super-Large Files

For loading files that require the majority of your system's memory, try tweaking your system's ulimit before starting PyMOL. Be warned, when your system uses its full amount of memory and swap space, it comes to a halt very quickly.

# shows current setup
ulimit -a

# allows setting of a limit in current shell.
ulimit -v SizeInKB