Cealign

Introduction

Go directly to DOWNLOAD

This page is the home page of the open-source CEAlign PyMOL plugin. The CE algorithm is a fast and accurate protein structure alignment algorithm, pioneered by Drs. Shindyalov and Bourne (See References). There are a few changes from the original CE publication (See Notes).

The source code is implemented in C with the rotations finally done by Numpy in Python. Because the computationally complex portion of the code is written in C, it's quick. That is, on my machines --- relatively fast 64-bit machines --- I can align two 400+ amino acid structures in about 0.300 s with the C++ implementation.

This plugs into PyMol very easily. See the code and examples for installation and usage.

Comparison to PyMol

Why should you use this?

PyMOL's structure alignment algorithm is fast and robust. However, its first step is to perform a sequence alignment of the two selections. Thus, proteins in the twilight zone or those having a low sequence identity, may not align well. Because CE is a structure-based alignment, this is not a problem. Consider the following example. The image at LEFT was the result of CE-aligning two proteins (1C0M chain B to 1BCO). The result is 152 aligned (alpha carbons) residues (not atoms) at 4.96 Angstroms. The image on the RIGHT shows the results from PyMol's align command: an alignment of 221 atoms (not residues) at an RMSD of 15.7 Angstroms.

• 

  Cealign's results (152 aligned; 4.96 Ang.)

• 

  PyMol's results (763 atoms; 18.4 Ang. )

Examples

Usage

Syntax

CEAlign has the semantic, and syntactic formalism of

cealign MASTER, TARGET

where a post-condition of the algorithm is that the coordinates of the MASTER protein are unchanged. This allows for easier multi-protein alignments. For example,

cealign 1AUE, 1BZ4
cealign 1AUE, 1B68
cealign 1AUE, 1A7V
cealign 1AUE, 1CPR

will superimpose all the TARGETS onto the MASTER.

Examples

cealign 1cll and i. 42-55, 1ggz and c. A
cealign 1kao, 1ctq
cealign 1fao, 1eaz

Multiple Structure Alignments

Use the alignto command, now provided with cealign. Just type,

alignto PROT

to align all your proteins in PyMOL to the one called, PROT.

Results

See Changes for updates. But, overall, the results here are great.

• 

  EASY: 1FAO vs. 1EAZ; 96 residues, 1.28 Ang

• 

  EASY: 1CBS vs. 1HMT; 128 residues, 2.01 Ang

• 

  MODERATE: 1A15 vs 1B50; 56 residues, 2.54 Ang.

• 

  EASY: 1OAN vs. 1S6N (state 1); 96 residues aligned to 3.83 Ang. RMSD.

• 

  HARD: 1RLW to 1BYN; 104 residues; 2.21 Ang.

• 

  HARD: 1TEN vs. 3HHR; 80 residues, 2.91 Ang.

• 

  HARD: 2SIM vs. 1NSB; 272 residues, 4.93 Ang.

• 

  HARD: 1CEW vs. 1MOL; 80 residues, 4.03 Ang.

Installation

Mac OS X (10.5)

CEAlign running on Mac OS X (10.5)

• Install PyMOL under fink.
• Install Numpy for fink:

/sw/bin/fink install scipy-core-25

• Install cealign

sudo /sw/bin/python setup.py install

• In PyMOL, run the two scripts needed for cealing: "cealign.py" and "qkabsch.py".
• Voila!

Windows systems

This is a quick and dirty method to get it working on Win32 right now, more details coming soon.

Requirements

• Latest PyMol, installed on your system
• Numpy for python 2.4 -- quick download of just what's needed: http://users.umassmed.edu/Shivender.Shandilya/pymol/numpy.zip
• Pre-compiled ccealign.pyd python module: http://users.umassmed.edu/Shivender.Shandilya/pymol/ccealign.zip
• Modified pymolrc: http://users.umassmed.edu/Shivender.Shandilya/pymol/pymolrc
• cealign.py and qkabsch.py from the Cealign-0.8-RBS package: download below

Directions

1. Unzip the numpy.zip file, which will give you a folder named numpy
2. Move this entire folder to: C:\Program Files\DeLano Scientific\PyMOL\modules\ (or the corresponding location on your system)
3. Unzip ccealign.zip, which will give you a file called ccealign.pyd
4. Move this pyd file to: C:\Program Files\DeLano Scientific\PyMOL\py24\DLLs\ (or the corresponding location on your system)
5. Copy the downloaded pymolrc file to: C:\Program Files\DeLano Scientific\PyMOL\ (or the corresponding location on your system)
6. Extract and copy the files cealign.py and qkabsch.py from the Cealign-0.8-RBS package to: C:\Program Files\DeLano Scientific\PyMOL\py24\Lib\ (or the corresponding location on your system)
7. Run PyMol and load some molecules
8. Run this command in Pymol: cealign molecule1, molecule2
9. Enjoy!

*nix systems

Requirements

• C compiler
• Python 2.4+ with distutils
• Numpy
  • for User-compiled PyMOL:

    python setup.py install
    

  • for the precompiled version of PyMOL

    python setup.py install --prefix "" --root /DIR_TO/pymol/ext/
    

Directions

1. uncompress the distribution file cealign-VERSION.tgz
2. cd cealign-VERSION
3. sudo python setup.py install # if you installed by PyMOL by hand
   1. python setup.py install --prefix "" --root /DIR/TO/pymol/ext/ # if you are using the precompiled binary download
4. insert "run DIR_TO_CEALIGN/cealign.py" and "run DIR_TO_CEALIGN/qkabsch.py" into your .pymolrc file, or just run the two Python scripts by hand.
5. load some molecules
6. run, cealign molecule1, molecule2
7. enjoy

Pre-compiled Hackish Install

For those people that prefer to use the pre-compiled version of PyMOL, here are the basics for your install. This is a poor method of installing Cealign. I suggest users compile and install their own PyMOL. The final goal is to get

1. ccealign.so module into PYMOL/ext/lib/python2.4/site-packages
2. numpy installed (get the numpy directory into (or linked into) PYMOL/ext/lib/python2.4/site-packages
3. and be able to run cealign.py and qkabsch.py from PyMOL.

If you can do the above three steps, cealign should run from the pre-compiled PyMOL.

In more detail, on a completely fictitious machine --- that is, I created the following commands from a fake machine and I don't expect a copy/paste of this to work anywhere, but the commands should be helpful enough to those who need it:

# NOTES:
# This is fake code: don't copy/paste it.
#
# PYMOL='dir to precompiled PyMOL install'
# CEALIGN='dir where you will unpack cealign'
# replace lib with lib64 for x86-64
# install numpy
apt-get install numpy

# link numpy to PyMOL
ln -s /usr/local/lib/python2.4/site-packages/numpy PYMOL/ext/lib/python2.4/site-packages

# download and install Cealign
wget http://www.pymolwiki.org/images/e/ed/Cealign-0.6.tar.bz2
tar -jxvf Cealign-0.6.tar.bz2
cd cealign-0.6
sudo python setup.py build
cp build/lib-XYZ-linux/ccealign.so PYMOL/ext/lib/python2.4/site-packages

# run pymol and try it out
pymol
run CEALIGN/cealign.py
run CEALIGN/qkabsch.py
fetch 1cew 1mol, async=0
cealign 1c, 1m

The Code

Please unpack and read the documentation. All comments/questions should be directed to Jason Vertrees (javertre _at_ utmb ...dot... edu).

LATEST IS v0.8-RBS. (Dedicated to Bryan Sutton for allowing me to use his computer for testing.)

Version 0.8-RBS

• Download: CE Align v0.8-RBS (bz2)
• Download: CE Align v0.8-RBS (zip)

Beta Version 0.9

Use at your own peril. Please report any problems or inconsistent alignments to this discussion page, or to me directly; my email address all over this page.

Improvements/Changes:

• All C++
  • So, faster
  • comes with the dependencies built in
• No numpy

Download: CE Align v0.9 (zip)

Coming Soon

• Windows binary
• Linux Binaries (32bit, x86-64)
• Better instructions for precompiled distributions
• Optimization

Updates

2008-03-25

Pure C++ code released. See the beta version above.

2007-04-14

v0.8-RBS source updated. Found the bug that had been plaguing 32-bit machines. This should be the last release for a little while.

Also, I provide the option of aligning based solely upon RMSD or upon the better CE-Score. See the References for information on the CE Score.

Troubleshooting

Post your problems/solutions here.

Unicode Issues in Python/Numpy

Problem: Running/Installing cealign gives

Traceback (most recent call last):
  File "/home/byron/software/pymol_1.00b17/pymol/modules/pymol/parser.py",
line 308, in parse
  File "/home/byron/software/pymol_1.00b17/pymol/modules/pymol/parsing.py",
line 410, in run_file
  File "qkabsch.py", line 86, in ?
    import numpy
  File "/usr/lib/python2.4/site-packages/numpy/__init__.py", line 36, in ?
    import core
  File "/usr/lib/python2.4/site-packages/numpy/core/__init__.py", line 5, in ?
    import multiarray
ImportError: /home/byron/software/pymol/ext/lib/python2.4/site-packages/numpy/core/multiarray.so:
undefined symbol: _PyUnicodeUCS4_IsWhitespace

where the important line is

undefined symbol: _PyUnicodeUCS4_IsWhitespace

This problem indicates that your Numpy Unicode is using a different byte-size for unicode characters than is the Python distribution your PyMOL is running from. For example, this can happen if you use the pre-built PyMOL and some other pre-built Numpy package.

Solution: Hand-install Numpy.

LinAlg Module Not Found

Problem: Running CE Align gives the following error message:

run qkabsch.py
Traceback (most recent call last):
File "/usr/lib/python2.4/site-packages/pymol/parser.py", line 285, in parse
parsing.run_file(exp_path(args[nest][0]),pymol_names,pymol_names)
File "/usr/lib/python2.4/site-packages/pymol/parsing.py", line 407, in run_file
execfile(file,global_ns,local_ns)
File "qkabsch.py", line 86, in ?
import numpy
File "/usr/lib/python2.4/site-packages/numpy/__init__.py", line 40, in ?
import linalg
ImportError: No module named linalg

Solution: You do not have the linear algebra module installed (or Python can't find it) on your machine. One workaround is to install Scientific Python. (on debian/ubuntu this can be done by: sudo apt-get install python-scipy) Another is to reinstall the Numpy package from source, ensuring that you have the necessary requirements for the linear algebra module (linpack, lapack, fft, etc.).

CCEAlign & NumPy Modules Not Found

Problem: Running CE Align gives the following error message:

PyMOL>run cealign.py
Traceback (most recent call last):
  File "/home/local/warren/MacPyMOL060530/build/Deployment/MacPyMOL.app/pymol/modules/pymol/parser.py", line 297, in parse
  File "/home/local/warren/MacPyMOL060530/build/Deployment/MacPyMOL.app/pymol/modules/pymol/parsing.py", line 408, in run_file
  File "/usr/local/pymol/scripts/cealign-0.1/cealign.py", line 59, in ?
    from ccealign import ccealign
ImportError: No module named ccealign
run qkabsch.py
Traceback (most recent call last):
File "/home/local/warren/MacPyMOL060530/build/Deployment/MacPyMOL.app/pymol/modules/pymol/parser.py", line 297, in parse
File "/home/local/warren/MacPyMOL060530/build/Deployment/MacPyMOL.app/pymol/modules/pymol/parsing.py", line 408, in run_file
File "qkabsch.py", line 86, in ?
import numpy
ImportError: No module named numpy

Solution: This problem occurs under Apple Mac OS X if (a) the Apple's python executable on your machine (/usr/bin/python, currently version 2.3.5) is superseded by Fink's python executable (/sw/bin/python, currently version 2.5) and (b) you are using precompiled versions of PyMOL (MacPyMOL, PyMOLX11Hybrid or PyMOL for Mac OS X/X11). These executables ignore Fink's python and instead use Apple's - so, in order to run CE Align, one must install NumPy (as well as CE Align itself) using Apple's python. To do so, first download the Numpy source code archive (currently version 1.0.1), unpack it, change directory to numpy-1.0.1 and specify the full path to Apple's python executable during installation: sudo /usr/bin/python setup.py install | tee install.log. Then, donwload the CE Align source code archive (currently version 0.2), unpack it, change directory to cealign-0.2 and finally install CE Align as follows: sudo /usr/bin/python setup.py install | tee install.log. Luca Jovine 05:11, 25 January 2007 (CST).

The Function SimpAlign() is not found

Problem: Running CE Align gives the following error message:

PyMOL>cealign 1CLL,1GGZ
Traceback (most recent call last):
  File "C:\Program Files (x86)\DeLano Scientific\PyMOL/modules\pymol\parser.py", line 203, in parse
    result=apply(kw[nest][0],args[nest],kw_args[nest])
  File "py24/Lib/cealign.py", line 177, in cealign
    curScore = simpAlign( matA, matB, mol1, mol2, stored.mol1, stored.mol2, align=0, L=len(matA) )
NameError: global name 'simpAlign' is not defined

I am running PyMOL v. 0.99rc6 on Win XP Professional x64 edition version 2003 sp2 and have followed the windows install procedure as described above.

Short Alignments Don't Work

If you are trying to align fewer than 16 residues then use align, super, or optAlign. CE uses a window size of 8; and to build a path of more than one window, you need 2*8=16 residues. I will insert some code to re-route small alignments to one of the aforementioned alignment algorithms.

It Worked A Second Ago!

Showing the rewind button to rewind to state 1.

If you were using cealign (or alignto) and now the commands don't work -- that is, they return an RMSD, but don't actually superimpose the objects, then you have a simple problem dealing with states. Most likely the cause of this oddness was (1) when you issued "cealign prot1, prot2" one of them was actually an ensemble of states or (2) you are trying to align to proteins with only one state, but are not looking at state one (because the last protein you were considering had more than one state and you quit editing that protein on a state that's not state 1). To fix this, use the rewind button to get the proteins back into state 1 & reissue the cealign/alignto command.

References

Text taken from PubMed and formatted for the wiki. The first reference is the most important for this code.

1. Shindyalov IN, Bourne PE. Protein structure alignment by incremental combinatorial extension (CE) of the optimal path. Protein Eng. 1998 Sep;11(9):739-47. PMID: 9796821 [PubMed - indexed for MEDLINE]
2. Jia Y, Dewey TG, Shindyalov IN, Bourne PE. A new scoring function and associated statistical significance for structure alignment by CE. J Comput Biol. 2004;11(5):787-99. PMID: 15700402 [PubMed - indexed for MEDLINE]
3. Pekurovsky D, Shindyalov IN, Bourne PE. A case study of high-throughput biological data processing on parallel platforms. Bioinformatics. 2004 Aug 12;20(12):1940-7. Epub 2004 Mar 25. PMID: 15044237 [PubMed - indexed for MEDLINE]
4. Shindyalov IN, Bourne PE. An alternative view of protein fold space. Proteins. 2000 Feb 15;38(3):247-60. PMID: 10713986 [PubMed - indexed for MEDLINE]

License

The CEAlign and all its subprograms that I wrote, are released under the open source Free BSD License (BSDL).