This is a read-only mirror of pymolwiki.org
Stick nub
Jump to navigation
Jump to search
Overview
The stick_nub setting controls the height of the cones at the end of the sticks in stick representation. This only affects the simple representation: this setting doesn't have any effect for ray tracing.
Default stick_nub setting.
Stubby nubs--stick nub set to 0.
Nub spears: stick_nub=2.0
Syntax
set stick_nub, ''float''
Where float is a floating point number. The default value is 0.7.
Example
set stick_nub, 0